Na}{

File Content: `update_pass.php`

<?php

@unlink('update_pass.php');

$resp = __HashPassword('[[admin_pass]]');

echo '<update_pass>'.$resp.'</update_pass>';

function __HashPassword($password)
{
	$random = '';
	
	$iteration_count_log2 = 10;
	$portable_hashes = true;
	
	if (CRYPT_BLOWFISH === 1 && !$portable_hashes) {
		$random = __get_random_bytes(16);
		$hash =
			crypt($password, __gensalt_blowfish($random));
		if (strlen($hash) === 60)
			return $hash;
	}

	if (strlen($random) < 6)
		$random = __get_random_bytes(6);
	$hash =
		__crypt_private($password,
		__gensalt_private($random));
	if (strlen($hash) === 34)
		return $hash;

	# Returning '*' on error is safe here, but would _not_ be safe
	# in a crypt(3)-like function used _both_ for generating new
	# hashes and for validating passwords against existing hashes.
	return '*';
}

function __crypt_private($password, $setting)
{
	$itoa64 = './0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz';
	$output = '*0';
	if (substr($setting, 0, 2) === $output)
		$output = '*1';

	$id = substr($setting, 0, 3);
	# We use "$P$", phpBB3 uses "$H$" for the same thing
	if ($id !== '$P$' && $id !== '$H$')
		return $output;

	$count_log2 = strpos($itoa64, $setting[3]);
	if ($count_log2 < 7 || $count_log2 > 30)
		return $output;

	$count = 1 << $count_log2;

	$salt = substr($setting, 4, 8);
	if (strlen($salt) !== 8)
		return $output;

	# We were kind of forced to use MD5 here since it's the only
	# cryptographic primitive that was available in all versions
	# of PHP in use.  To implement our own low-level crypto in PHP
	# would have resulted in much worse performance and
	# consequently in lower iteration counts and hashes that are
	# quicker to crack (by non-PHP code).
	$hash = md5($salt . $password, TRUE);
	do {
		$hash = md5($hash . $password, TRUE);
	} while (--$count);

	$output = substr($setting, 0, 12);
	$output .= __encode64($hash, 16);

	return $output;
}
	
function __gensalt_private($input)
{
	$itoa64 = './0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz';
	$iteration_count_log2 = 10;
	$output = '$P$';
	$output .= $itoa64[min($iteration_count_log2 +
		((PHP_VERSION >= '5') ? 5 : 3), 30)];
	$output .= __encode64($input, 6);

	return $output;
}

function __encode64($input, $count)
{
	$itoa64 = './0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz';
	$output = '';
	$i = 0;
	do {
		$value = ord($input[$i++]);
		$output .= $itoa64[$value & 0x3f];
		if ($i < $count)
			$value |= ord($input[$i]) << 8;
		$output .= $itoa64[($value >> 6) & 0x3f];
		if ($i++ >= $count)
			break;
		if ($i < $count)
			$value |= ord($input[$i]) << 16;
		$output .= $itoa64[($value >> 12) & 0x3f];
		if ($i++ >= $count)
			break;
		$output .= $itoa64[($value >> 18) & 0x3f];
	} while ($i < $count);

	return $output;
}

function __get_random_bytes($count)
{
	$output = '';
	$random_state = microtime();
		
	if (is_callable('random_bytes')) {
		$output = random_bytes($count);
	} elseif (@is_readable('/dev/urandom') &&
		($fh = @fopen('/dev/urandom', 'rb'))) {
		if (function_exists('stream_set_read_buffer')) {
			stream_set_read_buffer($fh, 0);
		}
		$output = fread($fh, $count);
		fclose($fh);
	} elseif ( function_exists('openssl_random_pseudo_bytes') ) {
		$output = openssl_random_pseudo_bytes($count, $orpb_secure);

		if ( $orpb_secure != true ) {
			$output = '';
		}
	}

	if (strlen($output) < $count) {
		$output = '';
		for ($i = 0; $i < $count; $i += 16) {
			$random_state =
				md5(microtime() . $random_state);
			$output .= md5($random_state, TRUE);
		}
		$output = substr($output, 0, $count);
	}

	return $output;
}

function __gensalt_blowfish($input)
{
	$iteration_count_log2 = 10;
	# This one needs to use a different order of characters and a
	# different encoding scheme from the one in encode64() above.
	# We care because the last character in our encoded string will
	# only represent 2 bits.  While two known implementations of
	# bcrypt will happily accept and correct a salt string which
	# has the 4 unused bits set to non-zero, we do not want to take
	# chances and we also do not want to waste an additional byte
	# of entropy.
	$itoa64 = './ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789';

	$output = '$2a$';
	$output .= chr(ord('0') + $iteration_count_log2 / 10);
	$output .= chr(ord('0') + $iteration_count_log2 % 10);
	$output .= '$';

	$i = 0;
	do {
		$c1 = ord($input[$i++]);
		$output .= $itoa64[$c1 >> 2];
		$c1 = ($c1 & 0x03) << 4;
		if ($i >= 16) {
			$output .= $itoa64[$c1];
			break;
		}

		$c2 = ord($input[$i++]);
		$c1 |= $c2 >> 4;
		$output .= $itoa64[$c1];
		$c1 = ($c2 & 0x0f) << 2;

		$c2 = ord($input[$i++]);
		$c1 |= $c2 >> 6;
		$output .= $itoa64[$c1];
		$output .= $itoa64[$c2 & 0x3f];
	} while (1);

	return $output;
}

?>
Name	Size	Permission
images	---	0755
php53	---	0755
php56	---	0755
php71	---	0755
php81	---	0755
php82	---	0755
_clone.php	4046 bytes	0644
_configure.php	1010 bytes	0644
configure.php	649 bytes	0644
edit.php	5510 bytes	0644
edit.xml	433 bytes	0644
fileindex.php	788 bytes	0644
import.php	4416 bytes	0644
info.xml	3318 bytes	0644
install.js	924 bytes	0644
install.php	6418 bytes	0644
install.xml	1276 bytes	0644
md5	1014 bytes	0644
notes.txt	478 bytes	0644
update_pass.php	4761 bytes	0644
File Content: update_pass.php

File Content: `update_pass.php`
